Walker SSEP0225 SmartSep Oil/Water Separator - 225 SCFM

(No reviews yet) Write a Review
SKU:
SSEP0225
$988.24
Frequently bought together:

Description

The Walker Filtration SSEP0225 SmartSep Oil Water Separator is rated for up to 225 SCFM and 4,000 hours. This proven oil water separator is engineered for condensate removal and removes oil traces as low as 5 ppm.

The adaptable SmartSep Oil Water Separator can handle a wide range of climates and compressed air applications. With flow rates from 32 SCFM to 6,621 SCFM, there is a suitable size SmartSep oil water separator for nearly every compressed air application. 

Unlike other oil-water separators relying solely on gravitational separation, the Walker Filtration multi-step separation and filtration system ensures fewer oil spills or contamination risks. The system achieves multi-step separation with polypropylene bags and Oganoclay filters, which provide an extended 4,000-hour performance interval. Easy-to-use SmartService Overflow Indicators clearly indicate the need for filter changes and emulsion regulation.

The top of the oil water separator has indicator floats. The clean separator will fill with oily water which makes the polypropylene pre-filter float, causing the green indicator post to rise, indicating it is time to replace the filter. As the polypropylene filter becomes saturated and weighed down with oil, it will slowly sink, lowering the green post. Once it is time to replace the media, the red indicator post will rise, indicating the oil water separator needs to be serviced.

Oil Water Separator Indicator Floats for Walker SmartSep separator

The back of the Walker SmartSep oil-water separator has an outlet that connects to a drain line if necessary. Thanks to the highly efficient oil removal down to 5 ppm, the discharged condensate is well below EPA regulations and safe to dispose of in the environment. With the Walker Filtration SmartSep oil-water separator from Compressor Shop, you can safely and efficiently remove condensate and oil.

Walker Filtration SmartSep Oil Water Separator LiteratureView the Walker SmartSep Oil Water Separator Brochure

Walker Filtration SmartSep Oil Water Separator LiteratureView the Walker SmartSep Oil Water Separator Datasheet

*Rated capacities based upon no pre/after filters, no air dryer, 12-hour/day operation, 60% relative humidity, the ambient temperature of 77°F (25°C) & system operating pressure of 100 psig (7 barg).

Brochure

Datasheet

View AllClose

Additional Information

Dimensions:
11" x 16" x 20"
Weight:
23.8 Lbs.
Maximum Capacity (With dryer & filters):
180 SCFM
Maximum Capacity (Without dryer & filters):
225 SCFM
Inlet Size:
2 x 1/2"
Outlet Size:
1/2"
Correction Factors:
See datasheet
View AllClose