Frequently bought together:
Description
The Keltec KRAD-100 refrigerated air dryer has a 100 CFM capacity, max working pressure of 230 PSI, and 1-1/2" NPT connections. Keltec KRAD refrigerated air dryers efficiently remove condensate and particulate contamination resulting in extremely dry and clean compressed air.
- Low Dew Point: 38°F pressure dew point
- Low Pressure Drop: Pressure Drop is less than 3 PSI greatly reducing energy costs.
- Tropical Conditions: Operation at 140 F inlet temperatures, thanks to R134a refrigerant, with no problems.
- Compact Design: Compared to competitive units, every square inch inside the dryer is used providing a super small footprint.
- Easy Access: Cooling components can be easily reached in seconds with removable panels.
- Easy Ducting: Condensers are located at the top for easy ducting.
- Digital Interface Control: Eight temperature sensors provide complete air dryer monitoring.
- Aluminum Plate Heat Exchanger: Provides very low pressure drop (2 PSI) and very efficient 38°F real pressure dew point.
- Integrated Dual Filter System: Filters the compressed air to 0.01 micron.
- Clean Wiring: No wires inside the refrigerant side of the air dryer. Outside access to electrical with conduits.
- Pressure Switches: Pressure switched are installed in the electrical panel for easy access.
- Extra Ball Valves: Extra ball valves brazed into refriferant circuit to simplify parts replacement and eliminate chance of releasing refrigerant gas.
- Two Year Warranty
Benefit from less downtime, reduced maintenance, and seriously dry compressed air with the Keltec KRAD-100 refrigerated compressed air dryer.
View the Keltec KRAD Refrigerated Air Dryer Sizing & Specifications
View the KRAD Air Dryer Installation and Operation Manual
SIZING & SPECIFICATIONS
OPERATION MANUAL
Additional Information
Flow Rate: |
100 SCFM |
Connection Size: |
1-1/2" NPT |
Dew Point: |
38°F pressure dew point |
Maximum Pressure: |
230 PSI |
Pressure Drop: |
Less than 3 PSI |
Maximum Ambient Temperature: |
122°F |
Maximum Inlet Temperature: |
140°F |
Voltage: |
115/1/60 |
Replacement Filter Kit: |
ADFK3 |